Removing and installing (replacing) ornamental grille for bumper panel (side), Sport Line (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Necessary preliminary tasks: 

• Remove FRONT BUMPER PANEL .

Release and remove trim strip (1) at the marked latch mechanisms (2) from the rear.

Courtesy of BMW OF NORTH AMERICA, INC.

Release ornamental grille (1) at latch mechanisms (2) and pull out of bumper panel (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Latch mechanisms (arrow) at ornamental grille (1) must not be missing or damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only: 

Disengage and remount trims (1) of ornamental grille (2).

Courtesy of BMW OF NORTH AMERICA, INC.