Removing and installing/replacing right front fog light (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Necessary preliminary tasks:
- Partially release WHEEL ARCH COVER FRONT (FRONT SECTION) .
NOTE:
Perform operations on right side the same as the left side shown, use graphics in mirror image.
Fold wheel arch cover (1) back.
Unfasten plug connection (2) and disconnect.
Unfasten plug connection (1) and disconnect.
Release nut (2) and remove fanfare (3).
Release screws (1).
Tightening torque 63 12 2AZ .
Remove fog light (2) out of bumper panel (3) in direction of arrow.
Installation note:
Guides (1) on fog light (2) must not be damaged or missing.
On replacement of fog light or bumper panel at front:
- If necessary, remount BULB .
- Adjust FOG LIGHTS .