Adjusting headlights (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

COMPLY  with test prerequisites for headlight adjustment.

Carry out headlight adjustment at adjusting screws (1) and (2).

1. Adjustment screw primarily for vertical adjustment
2. Adjusting screw primarily for lateral adjustment
3. Adjust the height at the adjusting screw (1)

   US version only: 

   Courtesy of BMW OF NORTH AMERICA, INC.

   Only carry out the setting of the lateral adjustment when the safety web in the adjusting screw for the lateral adjustment is MISSING OR IS DAMAGED .

   If necessary, remove damaged plug with suitable tool

4. Make the lateral adjustment at the adjusting screw (2)

After headlight adjustment: 

Perform reference run. For this purpose, switch off and on the headlights. Check again headlight adjustment.

US version only: 

If the lateral adjustment was corrected, use a suitable tool to push a new plug using a suitable TOOL INTO THE ADJUSTING SCREW FOR THE LATERAL ADJUSTMENT WITHOUT DAMAGING IT .