22 11 100 Replacing right engine support arm (B58)

Necessary preliminary tasks: 

• Secure ENGINE IN INSTALLATION POSITION .
• Remove EXHAUST SYSTEM .
• Remove underbody protection at front and rear.
• Remove INTAKE SILENCER HOUSING .
• Remove the CATALYTIC CONVERTER .

Removal: 

Release screws (1).

Remove engine support arm (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install engine support arm (2).

Tighten down screws (1).

Tightening torque 22 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install the CATALYTIC CONVERTER .
• Install INTAKE SILENCER HOUSING .
• Install front and rear underbody protection.
• Install EXHAUST SYSTEM .