31 60 Output Shaft
31 60 OUTPUT SHAFT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Output shaft console to engine oil sump | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 19 Nm | |
| 2AZ Output shaft to wheel hub | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M16 | Observe instructions in Repair Manual. Replace collar bolt and spring. |
|
| Jointing torque Angle of rotation |
210 Nm 90° |