LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2017
>>
340i xDrive Automatic Trans
>>
Repair and Diagnosis
>>
Engine Performance
>>
Tune-Up
>>
Engine Electrical System - Repair (F30, 6-CYL AWD)
>>
E-Box
>>
12 90 150 Remove and install/replace control unit box
>>
REP-TAT-P-1290-02 Installing the holder for the Digital Motor Electronics-control unit
REP-TAT-P-1290-02 Installing the holder for the Digital Motor Electronics-control unit
Install the holder (2) for the Digital Motor Electronics-control unit.
Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATIONS
Digital Motor Electronics-control unit holder on spring strut dome
2.5 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.