LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Electrical System - Repair (F30, 6-CYL AWD) >> Alternator With Drive And Attachment >> 12 31 020 Removing and installing/replacing alternator >> REP-TAT-P-1231-01 Removing the alternator

REP-TAT-P-1231-01 Removing the alternator

WARNING: Working on 12 V electrical system. 
Risk of short circuits! Risk of fire! 
  • Make sure that there is no charger  connected to the jump start terminal in the engine compartment.
  • Detach battery ground lead from battery.
  • For auxiliary batteries: Detach battery minus cables from all auxiliary batteries.
WARNING: Hot surfaces. 
Risk of burning! 
  • Perform all work only on components that have cooled down.
NOTE: RISK OF DAMAGE 
Electrostatic discharge. 
Damage to or destruction of electrical components. 
  • Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
  • Read and comply with user information on using the associated special tool 12 7 060.
  • Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
  • Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
  • For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
scientia non olet · About LEMON Manuals