Removing and installing right engine bulkhead

Removal: 

Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen the nuts (1).

Remove engine bulkhead (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position engine bulkhead (2).

Tighten the nuts (1).

Tightening torque: 2.6 Nm.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

Tightening torque: 19 Nm.

Courtesy of BMW OF NORTH AMERICA, INC.