REP-TAT-P-1722-02 Install transmission oil cooler
- Install the transmission oil cooler (5).
- Tighten down screw (4).
TIGHTENING TORQUES SPECIFICATIONS
| Transmission oil cooler to crankcase |
|---|
| M6 |
| 8 Nm |
- Tighten down screws (3).
TIGHTENING TORQUES SPECIFICATIONS
| Transmission oil cooler to crankcase |
| M6 |
| 8 Nm |
- Connect the transmission oil lines (1) and lock them audibly.
- Connect and audibly lock coolant line (2).
- Connect and audibly lock coolant line (1).