Thermostat And Engine-Mounted Coolant Lines
THERMOSTAT AND ENGINE-MOUNTED COOLANT LINES - TIGHTENING TORQUE SPECIFICATION
| Connecting bracket to engine block | |
| M6 x 25 | 10 Nm |
| Coolant feed line/coolant return line to exhaust turbocharger | |
| M6 x 12 | 8 Nm |
| Coolant feed line to engine block | |
| M6 x 12 | 8 Nm |
| Coolant return line to cylinder head | |
| M6 x 12 | 8 Nm |
| Coolant return line to trim strip | |
| M6 x 12 | 8 Nm |
| Heat management module to engine block | |
| Captive screws | 8 Nm |