Oil Pumps With Strainer And Drive
OIL PUMPS WITH STRAINER AND DRIVE - TIGHTENING TORQUE SPECIFICATION
| Hydraulic valve to crankcase | |||
| M6 x 18 | Tightening torque | 8 Nm | |
| Oil intake manifold to oil pump | |||
| Hexagon screw M6x25 | Tightening torque | 8 Nm | |
| Oil pump to crankcase | |||
| External Torx socket M8x35 | Tightening torque | 19 Nm | |
| Sprocket wheel at the oil vacuum pump | |||
| Torx socket M8x1.25LHx35 IMPORTANT: left-hand thread Replace screw. |
1. Joining torque | 5 Nm | |
| 1. Angle of rotation | 90° | ||