11 21 Crankshaft and Bearings
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening Instruction | Torque Specification | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws Jointing torque |
5.0 Nm |
| Torque angle | 45° | |||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm |