LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine - Tightening Torques (F30, 6-CYL AWD) >> Connecting Rod With Bearing

Connecting Rod With Bearing

CONNECTING ROD WITH BEARING - TIGHTENING TORQUE SPECIFICATION

Connecting rod bearing cap to connecting rod 
Replace screws.
  Tighten screws crosswise. Joining torque 20 Nm
  1. Angle of rotation 70°
  2. Angle of rotation 70°
scientia non olet · About LEMON Manuals