REP-TAT-P-1137-01 Removing the servomotor for the eccentric shaft
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
NOTE:
RISK OF DAMAGE
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
NOTE:
TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
- Unlock ventilation line (1) and detach from intake plenum.
- Unlock connector (2) and detach.
- Motor oil may leak when detaching the servomotor, keep cleaning cloth ready.
- Loosen screws (1).
- Turn servomotor (1) on the screw in marked area towards the left in order to release the eccentric shaft.
- Detach the servomotor (1) from the cylinder head simultaneously.
- Turn wave maximum up to the end stop towards the left.