REP-TAT-P-1121-02 Installing the main bearing cap

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Replace screws (1) and (2).
• Tighten screws (1) and (2) on main bearing cap (3) crosswise.

TIGHTEN TORQUES SPECIFICATIONS

Main bearing cap to crankcase
M10x85 Replace screws.	1. Joining torque	25 Nm
	3. Angle of rotation	60°
	4. Angle of rotation	60°

Courtesy of BMW OF NORTH AMERICA, INC.