REP-TAT-P-1114-01 Remove front engine encapsulation

• Unlock the ventilation line (1), detach it off the tank vent valve and unclip in the highlighted area.
• Unlock and detach the ventilation line (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and detach the connectors (1) and (2).
• Unclip the wiring harness (3) in the highlighted areas and put to one side.
• Undo screw for the ground cable if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully remove the engine encapsulation (1).

Courtesy of BMW OF NORTH AMERICA, INC.