25 11 085 Replace gearshift lever knob and gearshift lever cover
Removal:
Pull installation frame of gaiter at the sides upwards out of center console.
IMPORTANT:
Do not use a tool, as this would damage the installation frame or the center console.
Tug firmly to remove button.
NOTE:
Do not twist knob during removal as this would cause the anti-twist lock in the knob to shear off.
Installation:
Fit knob on gearshift lever, align and press on until it snaps noticeably into place.
Press installation frame of gaiter downwards into center console at sides.
IMPORTANT:
Do not use a tool, as this would damage the installation frame or the center console.