22 11 100 Replacing right engine support arm

Necessary preliminary tasks: 

• Secure ENGINE IN INSTALLATION POSITION .
• Remove EXHAUST SYSTEM .
• Remove underbody protection at FRONT and REAR .
• Refer to REMOVE INTAKE SILENCER HOUSING .
• Remove the CATALYTIC CONVERTER .

Removal: 

Release screws (1).

Remove engine support arm (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install engine support arm (2).

Tighten down screws (1).

Tightening torque 22 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install the CATALYTIC CONVERTER .
• Install INTAKE SILENCER HOUSING .
• Install underbody protection at FRONT and REAR .
• Install EXHAUST SYSTEM .