31 12 Axle guide and axle strut
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
31 12 AXLE GUIDE AND AXLE STRUT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Tension strut to front axle support | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw. Tighten down in normal position. |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Tension strut to swivel bearing | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | Replace nut. | 175 Nm |
| 3AZ Wishbone to front axle support | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw and nut. Tighten down in normal position. |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 4AZ Wishbone to swivel bearing | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | Replace nut. | 175 Nm |