REP-TAT-P-1112-02 Installing the cylinder head gasket

• Check the fitting sleeves (1) for damage, replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace cylinder head gasket (1).

  Parts  : Cylinder head gasket

• For reworked cylinder heads, install a thicker cylinder head gasket (1) of +0.3 mm.
• Check cylinder head gasket (1) using the part number.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install cylinder head gasket (1) and place it correctly on the lining sleeves.

Courtesy of BMW OF NORTH AMERICA, INC.