REP-TAT-P-1112-02 Install acoustic cover

NOTE: RISK OF DAMAGE 
Damage to the acoustic cover. 
Jerky movements during disassembly and excessive application of force during installation may result in breakage of the acoustic cover. 

• Disassemble or mount the acoustic cover carefully.
• Disassemble or mount snap-lock couplings of the ball pivots one after the other.
• Disassemble or mount acoustic cover only at temperatures >20 °C.
• Use only distilled water as an auxiliary material during installation, no lubricants.

• Check the rubber mount 1  for a correct seat of the acoustic cover.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the acoustic cover 1  and fasten in the rubber mounts (markings).

Courtesy of BMW OF NORTH AMERICA, INC.