11 34 552 Removing and installing or replacing all valves (cylinder head removed): Notes

Preliminary work 

• Refer to INSTALLING THE CYLINDER HEAD ON THE SPECIAL TOOL
• Refer to REMOVING THE EXHAUST TURBOCHARGER (CYLINDER HEAD REMOVED)
• Refer to REMOVING EXHAUST TURBOCHARGER TRIM STRIP
• Refer to INSTALLING THE CYLINDER HEAD ON THE SPECIAL TOOL (turbocharger removed)
• Refer to CHECKING THE POSITION OF THE INTAKE CAMSHAFT (cylinder head removed)
• Refer to CHECKING THE POSITION OF THE INTAKE CAMSHAFT AT CYLINDERS 3 AND 4 (cylinder head removed)
• Refer to REMOVING TORSION SPRINGS
• Refer to REMOVING ALL GATES
• Refer to REMOVING ALL INTERMEDIATE LEVERS
• Refer to REMOVING INTAKE CAMSHAFT
• Refer to REMOVING THE SERVOMOTOR FOR THE ECCENTRIC SHAFT
• Refer to REMOVING ECCENTRIC SHAFT
• Refer to REMOVING EXHAUST CAMSHAFT
• Refer to REMOVING ALL ROLLER CAM FOLLOWERS 
• Refer to REMOVING VALVE SPRINGS 
• Refer to REMOVING VALVE STEM SEALS 

Follow-up work 

• Refer to INSTALLING VALVE STEM SEALS 
• Refer to INSTALLING VALVE SPRINGS 
• Refer to INSTALLING ALL ROLLER CAM FOLLOWERS 
• Refer to INSTALLING EXHAUST CAMSHAFT ADJUSTER 
• Refer to INSTALLING ECCENTRIC SHAFT
• Refer to INSTALLING SERVOMOTOR FOR THE ECCENTRIC SHAFT
• Refer to INSTALLING INTAKE CAMSHAFT
• Refer to CHECKING INSTALLATION POSITION OF ROLLER CAM FOLLOWERS
• Refer to CHECKING THE INTERMEDIATE LEVER CLASSIFICATION
• Refer to INSTALLING ALL INTERMEDIATE LEVERS
• Refer to INSTALLING ALL GATES
• Refer to CHECKING THE POSITION OF THE INTAKE CAMSHAFT (cylinder head removed)
• Refer to CHECKING THE POSITION OF THE INTAKE CAMSHAFT AT CYLINDERS 3 AND 4 (cylinder head removed)
• Refer to INSTALLING TORSION SPRINGS
• Disassemble cylinder head from the special tool (turbocharger removed)
• Refer to INSTALLING THE TRIM STRIP FOR THE EXHAUST TURBOCHARGER
• Refer to INSTALLING THE EXHAUST TURBOCHARGER (CYLINDER HEAD REMOVED)
• Assemble the cylinder head. Refer To INSTALLING ALL VALVES .