62 30 517 Adjusting head-up display
NOTE:
Vehicles with head-up displays are fitted with special windshields.
These windshields are marked with the letters "HUD" on the outside at the bottom right below the seal (1 ).
Prior to adjustment, fold seal (1) back, if necessary remove windshield panel cover on right, and make sure that a correct windshield is installed.
These windshields are marked with the letters "HUD" on the outside at the bottom right below the seal (1 ).
Prior to adjustment, fold seal (1) back, if necessary remove windshield panel cover on right, and make sure that a correct windshield is installed.
Connect vehicle to BMW diagnostic system.
Select service function under following path:
- Service function
- Body
- Head-Up Display
- Adjusting head-up display
NOTE:
The geometric representation of the Head-Up Display can be adjusted with the service function.