Stripping Operations - Replacing Front Left Wheel Arch

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Disconnect battery earth lead (FR number: 61 20 900)
Remove bumper trim (FR number: 51 11 156)
Remove front underbody protection assembly (job number: 51 49 490)
Remove coolant expansion tank (job number: 17 11 100)
Remove intake silencer housing (FR number: 41 35 111)
Remove front panel (FR number: 41 33 039)
Remove radiator (job number: 17 11 100)
Remove front wheel arch cover (front section) (job number: 51 71 038)
Remove front wheel arch cover (rear section) (job number: 51 71 039)
Remove panel for cover on left side member (job number: 51 71 447)
Remove front side panel left (FR number: 41 35 081)
Remove trailing link on left spring strut dome (job number: 51 71 371)
Remove engine compartment lid (job number: 41 61 000)
Remove left hinge for engine compartment lid (job number: 41 61 060)
Remove left front door (job number: 41 51 080)
Remove left partition wall for units compartment (job number: 51 71)
Remove DSC hydraulic unit (job number: 34 51 527)
Remove tandem brake master cylinder (job number: 34 31 002)
Remove brake booster (FR number: 34 33 505)
Remove left trailing link (job number: 31 12 050)
Remove left wishbone (FR number: 31 12 000)
Remove front left spring strut complete (job number: 31 31 000)
Release left wiring harness