33 33 101 Replacing two rubber mounts (rear) for rear axle support

Special tools required: 

• 33 4 140
• 33 0 012
• 33 4 149
• 2 241 760
• 2 208 576
• 2 155 744
• 2 208 574
• 2 241 779
• 2 208 780

Necessary preliminary tasks: 

• Lower REAR AXLE SUPPORT .

Withdrawing rubber mount: 

Complete special tool 33 4 140 using 33 0 012 and 33 4 149, as shown.

Courtesy of BMW OF NORTH AMERICA, INC.

Align notch (1) on the special tool 2 241 760 with the notch (2) on the rear axle support.

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out rubber mounts using special tools 2 241 760, 33 4 140, 2 208 576, 2 155 744 and 2 208 574 pull out of the rear axle support.

Courtesy of BMW OF NORTH AMERICA, INC.

Installing rubber mount: 

Notch (1) and arrow (2) of the rubber mount must point in the direction of travel.

Courtesy of BMW OF NORTH AMERICA, INC.

Draw in rubber mount (1) with special tools 2 241 779, 2 208 780, 2 155 744, 2 208 574 and 2 208 576 to limit position.

Courtesy of BMW OF NORTH AMERICA, INC.