31 35 000 Removing and installing/replacing front anti-roll bar

Necessary preliminary tasks: 

• Refer to REMOVING ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR 
• Refer to LOWERING FRONT AXLE SUPPORT 

Unscrew nuts (1).

Tightening torque 31 35 1AZ .

Remove retaining brackets.

Remove anti-roll bar (2) forward.

Installation note: 

Replace nuts (1).

Check both rubber mounts for damage.

• In the event of rubber mount damage, the anti-roll bar must be replaced.

Courtesy of BMW OF NORTH AMERICA, INC.