31 35 000 Removing and installing/replacing front anti-roll bar

Necessary preliminary tasks: 

• Remove the ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR .
• Lower the FRONT AXLE SUPPORT .

Unscrew nuts (1).

Tightening torque, refer to: 31 35 1AZ .

Remove retaining brackets.

Remove anti-roll bar (2) forward.

Installation note: 

Replace nuts (1).

Check both rubber mounts for damage.

• In the event of rubber mount damage, the anti-roll bar must be replaced.

Courtesy of BMW OF NORTH AMERICA, INC.