REP-TAT-P-3311-02-BMW Installing the dust plate
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Installing the dust plate
- Replace the dust plate (1).
Parts : dust plate
- Press the dust plate (1) onto the drive flange (2) in arrow direction with a hydraulic press and the special tool 0 492 261 (33 3 201)
.
Version B: Installing the dust plate
- Replace the large dust plate (1).
Parts : Large dust plate
- Press the large dust plate (1) onto the drive flange (3) in arrow direction with a hydraulic press (2) and the special tool 0 494 980 (33 4 464)
.
- Replace the small dust plate (1).
Parts : Small dust plate
- Press the small dust plate (1) onto the drive flange in arrow direction with a hydraulic press (2) and he special tool 0 494 980 (33 4 464) .