REP-TAT-P-3111-02 Tighten the bolts on the front axle support
- Replace gaskets (1).
Parts : Seals
- Check threads (1) to (3) for damage. If necessary, repair with Helicoil thread inserts.
- Tighten screws (1) to (3) hand-tight but do not tighten fully.
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Front axle support to body M12x45 120 Nm M12x165 120 Nm M14x60 120 Nm - Tighten down screws (2) and (3).TIGHTENING TORQUES SPECIFICATION
Front axle support to body M12x45 120 Nm M12x165 120 Nm M14x60 120 Nm