REP-TAT-P-5145-02 Removing/Installing the bottom right instrument panel trim
NOTE:
RISK OF DAMAGE
Scratches.
Tools and sharp-edged components can cause scratches.
Scratches.
Tools and sharp-edged components can cause scratches.
- Protect working area.
- Handle tools and components carefully.
Unfasten screw connection (1).
NOTE:
Version with knee airbag: Unscrew nuts (1).
Tightening torque 51 45 9AZ .
Release trim panel (2) at clamps (3).
Feed out trim panel (2) in area (A) toward the bottom.
Lower trim panel (2) slightly and disconnect plug connections behind it.
Installation note:
Feed in trim panel (2) in area (A) correctly behind the center console.
Clamps (3) must not be damaged.
Installation note:
Guides (1) must not be damaged or missing.
Feed guides (1) correctly into the corresponding holders on the vehicle.
Replacement (depending on version):
Remount FOOTWELL LIGHT (2) .
Remount power socket.