REP-TAT-P-5145-02-01 Installing the trim panel for the pedal mechanism

• Check the clips (1) and the guides (2) for damage and replace if necessary.
• Check the speakers (3) and the footwell light (4) and replace if necessary.
• Insert the guides (2) into the corresponding holder on the vehicle.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the trim panel for the pedal mechanism (2) toward the top and clip the clips (3) into the instrument panel.
• Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Trim panel for the pedal mechanism on the support for the instrument panel
	4.6 N.m

Courtesy of BMW OF NORTH AMERICA, INC.