51 32 160 Removing and installing/replacing inner cover on left or right window frame
Necessary preliminary tasks:
- Open side window if necessary
- Remove the FRONT DOOR TRIM PANEL
F30/F31/F35/F80 only:
- Remove inner WEATHER STRIP
IMPORTANT:
Risk of damage!
Cover (2) must not be kinked.
Cover (2) must not be kinked.
Lever out cover (2) at clamps (3).
Unclamp cover (2) in direction of arrow and remove.
Installation note:
Fixtures for clamps (3) on cover (2) must not be missing or damaged.
Installation note:
Make sure cover (1) is correctly seated in joint of rubber window seal (2).
Make sure cover (1) is correctly seated on door seal.