54 12 117 Replacing seal for glass slide/tilt sunroof panel

Necessary preliminary tasks: 

• Remove the GLASS SLIDE/TILT SUNROOF PANEL 

Pull off sealing (1) from glass slide/tilt sunroof panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Coat guide duct (1) and sealing (2) with soapy water.

Installation rear center, start with sealing joint (3).

Do not pull sealing too tight in the radii (leaks).

Courtesy of BMW OF NORTH AMERICA, INC.