52 26 202 Removing and installing/replacing rear panel on rear center seat backrest
Unclip trim cover for lock with a plastic wedge.
Move trim cover for lock a little towards the middle.
Detach trim cover for lock by pulling towards rear.
Installation note:
Retaining lugs on the trim cover for the lock must not be damaged.
Replace defective trim cover for lock.
NOTE:
Welt of backrest cover is partially positioned below the center armrest cover.
Carefully lift out the center armrest cover in the marked area (1).
Lever out welt in marked area.
Lever out welt in marked area.
Detach rear panel.
Installation note:
Insert the rear panel in the backrest frame first.
Insert welt of backrest cover in frame.