52 26 005 Removing and installing/replacing rear seat
Unclip rear seat on left and right towards top.
Installation note:
Feed seat belt buckles (1) into recesses in rear seat.
F30 only:
Release screw (1) from seat belt end fitting (2), center.
Tightening torque, refer to: 72 11 22AZ .
Feed out the end fitting from the rear seat.
Lift out rear seat.
Installation note:
End fitting is coded against incorrect assembly.
F35 only:
Unlock the belt lock (1).
Feed the rear center lower strap and belt lock out of the rear seat.
Lift out rear seat.