Stripping Operations - Replacing Front Right Wheel Arch

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Disconnect battery earth lead (FR number: 61 20 900)
Remove bumper trim (FR number: 51 11 156)
Remove front underbody protection assembly (job number: 51 49 490)
Remove intake silencer housing (FR number: 41 35 111)
Remove front panel (FR number: 41 33 039)
Remove radiator (job number: 17 11 100)
Remove power distribution module (job number: 12 63 586)
Remove front wheel arch cover (front section) (job number: 51 71 038)
Remove front wheel arch cover (rear section) (job number: 51 71 039)
Remove trim panel for cover on right side member (job number: 51 71 447)
Remove front right side wall (job number: 41 35 082)
Remove trailing link on right spring strut dome (job number: 51 71 371)
Remove engine compartment lid (job number: 41 61 000)
Remove right hinge for engine compartment lid (job number: 41 61 050)
Remove right front door (job number: 41 51 080)
Remove right partition wall for units compartment (job number: 51 71)
Release right wiring harness
Remove right trailing link (job number: 31 12 080)
Remove right wishbone (job number: 31 12 000)
Remove front right spring strut complete (job number: 31 31 000)