63 99 110 Replacing bulb for daytime driving lights, left
WARNING:
Follow instructions FOR HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
NOTE:
Work shown on the F30 by way of example, deviations in detail are possible in other models.
Turn protective cap (1) counterclockwise and remove.
IMPORTANT:
Risk of damage due to moisture penetration!
Installation note:
Check seal. Replace protective cap (1) if necessary.
, Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Protective cap (1) must lock correctly!
Turn protective cap (1) clockwise to limit position.
Installation note:
Check seal. Replace protective cap (1) if necessary.
, Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Protective cap (1) must lock correctly!
Turn protective cap (1) clockwise to limit position.
Pull back bulb holder (1) in direction of arrow out of headlight.
Installation note:
Make sure bulb holder (1) is exactly seated in headlight.
Pull bulb for daytime driving lights (1) out of bulb socket (2).
Installation note:
Note the BULB TYPE .