63 17 075 Removing and installing/replacing right front fog light
WARNING:
Follow instructions FOR HANDLING LIGHT BULBS (EXTERIOR LIGHTS)
Necessary preliminary tasks:
Version with right wheel arch auxiliary radiator:
- Partially release auxiliary radiator
On all other versions:
NOTE:
Perform operations on right side the same as the left side shown, use graphics in mirror image.
Only on version without auxiliary radiator:
Fold wheel arch cover (1) back.
Unfasten plug connection (2) and disconnect.
Unfasten plug connection (1) and disconnect.
Release nut (2) and remove fanfare (3).
Release screw (1).
Tightening torque, refer to: 63 12 2AZ .
Remove fog light (2) out of bumper panel (3) in direction of arrow.
Installation note:
Guides (1) on fog light (2) must not be damaged or missing.
On replacement of fog light or bumper panel at front:
- If necessary, convert the BULB .
- Adjust the FOG LIGHTS