63 17 070 Removing and installing/replacing left fog light
IMPORTANT:
Follow instructions FOR HANDLING LIGHT BULBS (EXTERIOR LIGHTS)
Necessary preliminary tasks:
Version with left wheel arch auxiliary radiator:
- Partially release auxiliary radiator
On all other versions:
Only on version without auxiliary radiator:
Fold wheel arch cover (1) back.
Unfasten plug connection (2) and disconnect.
Unfasten plug connection (1) and disconnect.
Release nut (2) and remove fanfare (3).
Release screw (1).
Tightening torque, refer to: 63 12 2AZ .
Remove fog light (2) out of bumper panel (3) in direction of arrow.
Installation note:
Guides (1) on fog light (2) must not be damaged or missing.
On replacement of fog light or bumper panel at front:
- If necessary, remount the BULB
- Adjust the FOG LIGHTS