61 71 061 Replacing washer fluid reservoir for windscreen washer system

Necessary preliminary tasks:

NOTE: Shown with side wall removed for purposes of clarity.

Release screw (1).

Tightening torque, refer to: 61 66 1AZ .

Pull the washer fluid reservoir (2) out of the guides (arrow) in the direction of the arrow).

Unlock and disconnect all plug connections.

Unlock filler hose and pull it off the fitting on the washer fluid reservoir.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Catch any escaping washer fluid if necessary.

Replacement:

Installation note:

Replace strainers on washer pumps
Coat sealing rings of washer pumps with lubricant.
Lay hose pipes of washer pumps without kinks and clip into holders on washer fluid reservoir
Top up the washer fluid reservoir