REP-TAT-P-6110-25-F2X Replacing wiring harness for front seat

Preliminary work 

• Remove the OUTER COVER ON FRONT SEAT
• Partially remove the FRONT SEAT

Overview of seat wiring harness 

Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and disconnect connector (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and disconnect connector (1).
• Remove the wiring harness (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace wiring harness (2).

  Parts:  Wiring harness

• Insert the wiring harness (2).
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check if the wiring harness (1) and the cable are correctly fed into the marked areas.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the FRONT SEAT (PARTIALLY REMOVED)
• Install the OUTER COVER ON THE FRONT SEAT
• Encode/Program CONTROL UNIT(S) AND DELETE FAULT MEMORY