84 50 565 Replacing Bluetooth cable aerial
If the vehicle is equipped with a high equipment head unit, the Bluetooth aerial is located in the wiring harness to the high equipment head unit.
Bluetooth cable aerial installation location (E61) when Combox is installed.
Remove backrest side section
Remove rear left door sill cover strip.
Reposition underbody panelling on the left side.
Unlock and disconnect plug connection of Bluetooth cable aerial (2) at Combox (1).
Secure Bluetooth cable aerial (2) repair kit at wiring harness for entrance, and close plug connection (1).
After successful completion of functional check, disconnect start and end of faulty Bluetooth cable aerial at first mounting point.
Installation location of the Bluetooth cable aerial (E61) on vehicles with NBT/HU.
Remove Head unit High or Head unit.
Partially remove center console.
Unlock and disconnect plug connection of Bluetooth cable aerial (1).
Secure Bluetooth cable aerial (1) repair kit at wiring harness below center console (2), and close plug connection.
After successful completion of functional check, disconnect start and end of faulty Bluetooth cable aerial at first mounting point.