64 52 Air conditioning compressor
64 52 AIR CONDITIONING COMPRESSOR - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to air-conditioning compressor | F01/F02/F03/F06/F07/F10/F10h/F11/F12/F13/F15/F25/F39 | m8 | 18 Nm | |
| F10/F11/F15/F16/F18/F20/F21/F22/F25/F26/F30/F31/F32/F33/F34/F35/F36/F80/F82 | m6 | 8 Nm | ||
| N20 F18 | m8x30 | 18 Nm | ||
| 2AZ Oil filler plug, air conditioning compressor | F01/F02/F03/F06/F07/F10/F11/F18/F12/F13/F15/F16/F25/F26/F20/F21/F30/F22/F31/F32/F33/F34/F35/F36/F45/F46/F48/F49/F54 | 30±1 Nm | ||
| 3AZ Air conditioning compressor on crankcase | N47T, F10/F11/F15/F20/F21/F22/F25/F26/F30/F31/F32/F33/F34/F36 | m10 | 38 Nm | |
| N13, F20/F21/F22/F30/F31 | m8 | 22 Nm | ||
| N20, F07/F10/F11/F18/F20/F21/F22/F25/F26/F30/F31/F33/F34/F32 | m8 | 38 Nm | ||
| N54, F01/F02 | m8 | 19 Nm | ||
| N55, F06/F07/F10/F10h/F11/F15/F16/F18/F12/F13/F20/F21/F22/F26/F25/F30/F31/F32/F33/F34/F35/F36/F87 | m8 | 19 Nm | ||
| N57, F01/F02/F07/F10/F11 | m8 | 19 Nm | ||
| N57, F06/F07/F10/F11/F12/F13/F15/F16/F26/F25/F30/F32/F31/F33/F34/F36 | m10 | 38 Nm | ||
| N63, F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | m8 | 21±3 Nm | ||
| N63T, F15/F16 | m8 | 24, 6 Nm | ||
| N74, F01/F02/F03 | m8 | 21±3 Nm | ||
| F39/F45/F46/F48/F49/F52/F54/F55/F56/F57 all/F60 | m10 | 38 Nm | ||
| B47, F10/F11/F20/F21/F22/F23/F25/F26 | m10 | 38 Nm | ||
| B37, F20/F21 | m10 | 38 Nm | ||
| B48, F30/F31 | m10 | 38 Nm | ||
| B58, F30/F31 | m10 | 38 Nm | ||
| B38, F20/F21/F22/F23/F30/F31 | m8 | 19 Nm | ||
| S55, F80/F82/F83 | m8 | 24, 6 Nm | ||
| S63, F85/F86 | m6 | 10 Nm 180° |
||
| N52, F01/F02/F10/F11/F18/F25 | m8 | 10±2 Nm | ||
| 4AZ Refrigerant lines to air-conditioning compressor | F04 | 19 Nm | ||
| 5AZ Air conditioning compressor holder on crankcase lower section | N55, F20/F21/F22/F23/F30/F32/F31/F33/F35/F36/F87 | m6 | 19 Nm | |
| 6AZ Refrigerant lines to component carrier | F10h | m6 | 8 Nm | |
| 7AZ Holder of refrigerant lines to air conditioning compressor | N57X, F10/F11 | m6 | 8 Nm |