11 12 025 Remove and install/replace design cover (B48B)
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
Removal:
Unclip design cover (1) in upward direction.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Installation:
Ensure correct installation of the rubber plugs (1).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Position design cover (1) and clip in the marked areas.
Courtesy of BMW OF NORTH AMERICA, INC.
|