REP-TAT-P-1241-02 Installing starter motor

Prerequisite 

Battery earth lead is disconnected.

• Mount the starter motor (2).
• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Starter mounting to engine
  M8x60	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the positive battery cable on the starter motor.
• Tighten the nut and mount the cover (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Battery positive lead to starter
  Cap nutM8	Tightening torque	13.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the cable (terminal 50) on the starter motor and tighten the nut (2).