REP-TAT-P-1390-01 Remove tank vent valve

NOTE: RISK OF DAMAGE 
Electrostatic discharge. 
Damage to or destruction of electrical components. 

• Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
• Read and comply with user information on using the associated special tool 12 7 060.
• Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: NOTES ON ESD PROTECTION (ELECTROSTATIC DISCHARGE)

• Unlock and loosen connector (1).
• Unlock and release the tank vent lines (arrows).
• Detach and remove the tank vent valve (2) from the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.