REP-TAT-P-1128-01 Removing the drive belt for alternator

CAUTION: Spring preload. 
Injury hazard! 

• The use of the specified special tool (tool) is mandatory.
• The described operation must be carried out properly.

CAUTION: Component with preload. 
Injury hazard! 

• Reduce preload as far as possible before disassembly. Relieve component.

NOTE: TECHNICAL INFORMATION 
If the drive belt is reused: Mark the direction of rotation and reinstall the drive belt in same direction of rotation.

NOTE: TECHNICAL INFORMATION 
Replace drive belt if it is contaminated with coolant and oil residue.

• Increase the preload on the belt tensioner in the arrow direction.
• Secure the belt tensioner with the special tool 0 496 268 (11 0 390). 
• Remove the drive belt for the alternator 1  .

Courtesy of BMW OF NORTH AMERICA, INC.