REP-TAT-P-1134-01 Remove all valves
NOTE:
RISK OF DAMAGE
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
- Equipment specification B38
- Twist the device (2) on the crank (1) 180°.
- Equipment specification B46/B48
- Turn the device (2) on the crank (1) 180° in arrow direction
.
- Equipment specification B58
- Turn the device (2) on the crank (1) 180° in arrow direction.
- Unlock the special tool 0 494 370 (11 9 005)
in the direction of the arrow
.
- Equipment specification B38
- Remove special tool 0 494 373 (11 9 008)
if necessary.
- Equipment specification B46/B48
- Remove special tool 0 494 373 (11 9 008)
if necessary.
- Equipment specification B58
- Pull out and remove special tools 0 494 371 (11 9 006), 0 494 372 (11 9 007) and 0 494 373 (11 9 008) in the arrow direction.
- Push the valve stem (1) into the cylinder head in the direction of the arrow
.
- Remove the valve (1) and position in special tool 0 495 105 (11 4 480) in order.