Engine Repair (F30, 6-CYL RWD) (2 Of 4)

• 11 14 Housing Cover
  • 11 14 005 Replacing front crankshaft seal
    • Notes
    • REP-TAT-P-1114-25 Replacing the front crankshaft seal
  • 11 14 110 Removing and installing/sealing or replacing bottom timing case cover
    • Notes
    • REP-TAT-P-1122-02 Installing the flywheel
  • 11 14 311 Removing and installing/replacing engine encapsulation (front top)
    • Notes
    • REP-TAT-P-1114-01 Remove front engine encapsulation
    • REP-TAT-P-1114-02 Install front engine encapsulation
  • 11 14 605 Replacing the crankshaft seal (Transmission side) (Transmission is removed)
    • Notes
    • REP-TAT-P-1114-02 Removing the magnet wheel
    • REP-TAT-P-1114-02 Installing the magnet wheel
• 11 15 Crankcase Ventilation
  • 11 15 001 Replacing engine ventilation line
    • Notes
    • REP-TAT-P-1115-01 Remove engine ventilation line
    • REP-TAT-P-1115-02 Install engine ventilation line
• 11 21 Crankshaft With Bearing
  • 11 21 140 Remove, install/replace crankshaft, guide bearing shell
    • Notes
    • REP-TAT-P-1121-01 Removing the main bearing cap (collar bearing)
    • REP-TAT-P-1121-25 Replacing lower main bearing shell (collar bearing)
    • REP-TAT-P-1121-25 Replacing upper main bearing shell (collar bearing)
    • REP-TAT-P-1121-02 Installing the main bearing cap
  • 11 21 140 Removing, installing/replacing lower guide bearing shell of the crankshaft
    • Notes
    • REP-TAT-P-1121-01 Removing the main bearing cap (collar bearing)
    • REP-TAT-P-1121-25 Replacing lower main bearing shell (collar bearing)
    • REP-TAT-P-1121-02 Installing the main bearing cap
  • 11 21 500 Replacing the crankshaft (engine removed)
    • Notes
    • REP-TAT-P-1121-01 Removing crankshaft
    • REP-TAT-P-1121-05 Determining the classification of the crankshaft main bearing shell
    • REP-TAT-P-1121-25 Replacing the crankshaft main bearing shells
    • REP-TAT-P-1121-02 Installing the crankshaft
    • REP-TAT-P-1121-05 Checking the crankshaft side clearance
    • REP-TAT-P-1121-05 Check the coefficient of friction for the crankshaft
    • REP-TAT-P-1125-02 Installing all pistons with connecting rod
  • REP-TAT-P-1114-01 Remove rear timing case cover
  • REP-TAT-P-1114-02 Install the rear timing case cover
• 11 22 Flywheel
  • 11 22 510 Removing and installing/replacing flywheel (transmission removed)
    • REP-TAT-P-1122-01-1 Removing flywheel
    • REP-TAT-P-1122-01 Removing flywheel
    • REP-TAT-P-1122-02 Installing the flywheel
    • REP-TAT-P-1122-02-1 Installing the flywheel
• 11 23 Vibration Damper
  • 11 23 010 Removing and installing/replacing vibration damper
    • Notes
    • REP-TAT-P-1123-01 Removing the vibration damper
    • REP-TAT-P-1114-25 When replacing the vibration damper: Replacing the front crankshaft seal
    • REP-TAT-P-1123-02 Installing the vibration damper
• 11 24 Connecting Rod With Bearing
  • 11 24 571 Replacing all connecting rod bearing shells
    • Notes
    • REP-TAT-P-1124-25 Replacing all connecting rod bearing shells
  • 11 24 571 Replacing all connecting rod bearing shells (pistons removed)
    • REP-TAT-P-1124-25 Replacing all connecting rod bearing shells
• 11 25 Piston With Rings And Bolts
  • 11 25 530 Removing and installing or replacing all pistons (engine removed)
    • Notes
    • REP-TAT-P-1125-01 Removing all pistons with connecting rod
    • REP-TAT-P-1125-13 Measuring all pistons
    • REP-TAT-P-1125-25 Replacing: Remounting all pistons
    • REP-TAT-P-1111-13 Measuring all cylinders
    • REP-TAT-P-1125-02 Installing all pistons with connecting rod
  • 11 25 671 Replacing the piston rings on all pistons (pistons removed)
    • REP-TAT-P-1125-05 Check side clearance of piston rings
    • REP-TAT-P-1125-01 Remove piston ring
    • REP-TAT-P-1125-05 Check end clearance of piston rings
    • REP-TAT-P-1125-14 Aligning piston rings
    • REP-TAT-P-1125-02 Attach piston rings
• 11 28 V Belt With Belt TENSIONER And Idler Pulley
  • 11 28 010 Replacing drive belt for alternator
    • Notes
    • REP-TAT-P-1711-01 Remove fan cowl
    • REP-TAT-P-1128-01 Removing the drive belt for alternator
  • 11 28 020 Replacing tensioning device for drive belt of the alternator
    • Notes
    • REP-TAT-P-1128-01 Removing the belt tensioner
    • REP-TAT-P-1128-02 Installing the belt tensioner
• 11 31 Camshaft
  • 11 31 005 Check the timing of the camshaft(s) (Vehicles with automatic transmission)
    • Notes
    • REP-TAT-P-1131-05 Checking camshaft timing (Vehicles with automatic transmission)
  • 11 31 005 Check the timing of the camshaft(s) (Vehicles with manual transmission)
    • Notes
    • REP-TAT-P-1131-05 Checking camshaft timing (manual transmission)
  • 11 31 025 Removing and installing/replacing intake camshaft (Vehicles with automatic transmission)
    • Notes
    • REP-TAT-P-1131-01 Remove intake camshaft
    • REP-TAT-P-1131-25 When replacing intake camshaft: Remount camshaft sensor wheel
    • REP-TAT-P-1131-02 Install intake camshaft
  • 11 31 025 Removing and installing/replacing intake camshaft (Vehicles with manual transmission)
    • Notes
    • REP-TAT-P-1131-01 Remove intake camshaft
    • REP-TAT-P-1131-25 When replacing intake camshaft: Remount camshaft sensor wheel
    • REP-TAT-P-1131-02 Install intake camshaft
  • 11 31 028 Removing and installing/replacing exhaust camshaft (Vehicles with automatic transmission)
    • Notes
    • REP-TAT-P-1131-01 Remove exhaust camshaft
    • REP-TAT-P-1131-02 Install exhaust camshaft
  • 11 31 028 Removing and installing/replacing exhaust camshaft (Vehicles with manual transmission)
    • Notes
    • REP-TAT-P-1131-01 Remove exhaust camshaft
    • REP-TAT-P-1131-02 Install exhaust camshaft
  • 11 31 052 Replacing both timing chains
    • Notes
    • REP-TAT-P-1131-01 Remove timing chains
    • REP-TAT-P-1131-02 Installing the timing chains
  • 11 31 090 Remove and install/replace chain tensioner piston
    • Notes
    • REP-TAT-P-1131-01 Removing chain tensioner
    • REP-TAT-P-1131-02 Install chain tensioner
  • 11 31 505 Adjusting the timing of the camshaft(s)
    • Notes
    • REP-TAT-P-1131-14 Adjusting the timing of the camshafts