11 12 729 Checking cylinder head for watertightness (cylinder head dismantled): Notes

Preliminary work 

• Refer to INSTALLING THE CYLINDER HEAD ON THE SPECIAL TOOL 
• Refer to REMOVING THE EXHAUST TURBOCHARGER (CYLINDER HEAD REMOVED) 
• Refer to REMOVING EXHAUST TURBOCHARGER TRIM STRIP 
• Refer to INSTALLING THE CYLINDER HEAD ON THE SPECIAL TOOL (turbocharger removed) 
• Refer to the relevant instructions for disassembling cylinder head under procedure for REPLACING ALL VALVE STEM SEALS

Follow-up work 

• Assemble the cylinder head. Refer To INSTALLING ALL VALVES .
• Disassemble cylinder head from the special tool (turbocharger removed)
• Refer to INSTALLING THE TRIM STRIP FOR THE EXHAUST TURBOCHARGER 
• Refer to INSTALLING THE EXHAUST TURBOCHARGER (CYLINDER HEAD REMOVED) 
• Disassemble the cylinder head from the special tool